Car Auction http://chevroletspareset.com/ Chevrolet Auto Parts 741 964 http://chevroletspareset.com/-.html Mon, 20 Feb 2012 21:00:42 -0600
]]> 741 964 1\' http://chevroletspareset.com/-.html Sun, 19 Feb 2012 13:34:02 -0600
]]> 1\' -046 Silicone O-Ring 70A Durometer Red 4-1 4 ID 4-3 8 OD 1 16 Width Pack of 25 http://chevroletspareset.com/_046-Silicone-O_Ring-70A-Durometer-Red-4_1-4-ID-4_3-8-OD-1-16-Width-Pack-of-25-383.html Thu, 16 Feb 2012 20:56:04 -0600

-228 Silicone O-Ring, 70A Durometer, Red, 2-1/4" ID, 2-1/2" OD, 1/8" Width (Pack of 10)


Price: $4.05
You Save: (%)

Product Details

  • Meets standards defined by Aerospace Standard AS568A
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Made of silicone for use with a variety of chemicals and fluids
  • Durometer (hardness) of 70A for resistance to penetration
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces

Product Description

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

-042 Silicone O-Ring, 70A Durometer, Red, 3-1/4" ID, 3-3/8" OD, 1/16" Width (Pack of 25)


Price: $5.99
You Save: (%)

Product Details

  • Meets standards defined by Aerospace Standard AS568A
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Made of silicone for use with a variety of chemicals and fluids
  • Durometer (hardness) of 70A for resistance to penetration
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)

Product Description

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

-314 Silicone O-Ring, 70A Durometer, Red, 3/4" ID, 1-1/8" OD, 3/16" Width (Pack of 25)


Price: $6.67
You Save: (%)

Product Details

  • Durometer (hardness) of 70A for resistance to penetration
  • Meets standards defined by Aerospace Standard AS568A
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Made of silicone for use with a variety of chemicals and fluids

Product Description

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

-038 Silicone O-Ring, 70A Durometer, Red, 2-5/8" ID, 2-3/4" OD, 1/16" Width (Pack of 25)


Price: $10.62
You Save: (%)

Product Details

  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Meets standards defined by Aerospace Standard AS568A
  • Durometer (hardness) of 70A for resistance to penetration
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Made of silicone for use with a variety of chemicals and fluids

Product Description

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

-316 Silicone O-Ring, 70A Durometer, Red, 7/8" ID, 1-1/4" OD, 3/16" Width (Pack of 25)


Price: $9.36
You Save: (%)

Product Details

  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Meets standards defined by Aerospace Standard AS568A
  • Made of silicone for use with a variety of chemicals and fluids
  • Durometer (hardness) of 70A for resistance to penetration

Product Description

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

-331 Silicone O-Ring, 70A Durometer, Red, 2-1/4" ID, 2-5/8" OD, 3/16" Width (Pack of 10)


Price: $10.15
You Save: (%)

Product Details

  • Made of silicone for use with a variety of chemicals and fluids
  • Meets standards defined by Aerospace Standard AS568A
  • Round in cross-section to provide a seal between cylindrical overlapping surfaces
  • Can be used across a wide temperature range from -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C)
  • Durometer (hardness) of 70A for resistance to penetration

Product Description

This silicone O-ring is red in color, round in shape, has a durometer of 7OA, and is designed for use in a wide variety of sealing applications.

Silicone is acceptable for temperature applications between -65 degrees F (-54 degrees C) to 450 degrees F (232 degrees C). It has good resistance to ozone, weather, detergent, salt water, engine and transmission oil, non-petroleum brake fluid, hydraulic fluids that resist fire, vegetable and animal oils, and high molecular weight chlorinated aromatic hydrocarbons. Silicone is vulnerable to mechanical wear and tear, water and steam over 250 degrees F (121 degrees C), aromatic hydrocarbons (benzene), chlorinated hydrocarbons (trichloroethylene), acids and bases, and hydrocarbon fuels.

O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves, and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in a number of sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter.

This silicone O-ring has a shore durometer of 70A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation.

This silicone O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.

]]> Amazon Chevrolet Steering Wheel http://chevroletspareset.com/Chevrolet-Steering-Wheel-214.html Thu, 16 Feb 2012 12:51:19 -0600

Metra Axxess ASWC Universal Steering Wheel Control Interface (Black)


List Price: $75.69
Price: $44.00
You Save: $31.69(42%)

Product Details

  • Retains OEM Steering Wheel Controls
  • Auto-Detects Many Vehicle Makes and Aftermarket Radios
  • Universal Steering Wheel Control Interface
  • For Use with Radios Equipped with OE Steering Control Input
  • Can be Used On Most Any Vehicle with Steering Wheel Controls

Product Description

Finally, a simple solution to retaining the steering wheel controls of a vehicle when installing an aftermarket stereo. Introducing the Axxess ASWC, from Metra Electronics. This universal steering wheel interface is brand new for the 2010 line of Metra Axxess components and is designed to make the installers life much simpler. Unlike other steering wheel interfaces, the ASWC requires no manual programming. After making all the proper connections, this interface will automatically program itself with the new stereo and the vehicle. No more tedious programming of each button. The ASWC has a LED status light that will flash according to the programming and inform you when the sync is done. Its simple. Just plug it in and you are ready to go! Now installations can be faster, easier, and simpler! If you still prefer to do the programing manually, Axxess has left that as an option. No matter what type of vehicle or aftermarket stereo you are planning on installing, the ASWC has you covered! It is fully compatible with Pioneer, Sony, Alpine, Kenwood, Eclipse, JVC, and more. As long as the stereo has a wired steering wheel remote connection, the ASWC will connect and interface with the vehicle. Plus, the Metra ASWC is able to be updated. This means that the interface will never be out dated. For the simplest way to retain the steering wheel control in your car, choose the Axxess ASWC!

Scosche SWC1 Steering Wheel Control Interface


List Price: $69.95

Product Details

  • Steering Wheel Control Interface
  • Works with most aftermarket radios with wireless infrared remote capability
  • Allows retention of steering wheel or rear seat radio controls when an aftermarket radio is installed

Product Description

Scosche SWC1 Steering Wheel Control Interface

Chevy Gold Bowtie Style Premium Speed Grip Steering Wheel Cover


List Price: $12.99
Price: $9.26
You Save: $3.73(29%)

Product Details

  • Does not discolor or fade
  • Features molded-in colors
  • Specially formulated to eliminate the strong rubber odor
  • Provides a snug fit that will not slip
  • Sold individually

Product Description

PlastiColor Chevy Gold Bowtie Style Premium Speed Grip Steering Wheel Covers are the highest quality covers from PlastiColor. They are specially formulated to eliminate the strong rubber odor that is often associated with steering wheel covers. They are also stronger, and feature molded-in colors that will not discolor or fade. These covers provide a snug fit that will not slip, and feature all of the trend-relevant and licensed properties

Bell Automotive 22-1-52772-1 Stress Reliever Steering Wheel Cover


List Price: $14.99
Price: $9.26
You Save: $5.73(38%)

Product Details

  • Bell Automotive enjoy your ride
  • Easily slips-on to most standard car steering wheels
  • Feel the difference
  • Memory foam cover for comfort and look

Product Description

From fashion to function, Bell Automotive offers a wide variety of automotive accessories to meet every need. Staying charged on the go, keeping organized, or just looking for a little fun, Bell Automotive accessories help you make your ride your own. Enjoy your ride.

Pilot Automotive SW-111 Genuine Leather Steering Wheel Cover with Chevrolet Logo


List Price: $21.17
Price: $19.66
You Save: $1.51(7%)

Product Details

  • Genuine high grade leather
  • Offical licensed product
  • Easy slip on installation

Product Description

Licensed Product and Genuine Leather makes quality. This Steering Wheel Cover has a Chevy Logo at three points with the word Chevrolet beside it. It also has padding for extra comfort and reduces any vibrations from the road.

Chevy Diamond Plate Grip Style Steering Wheel Cover


List Price: $7.00
Price: $6.95
You Save: $0.05(1%)

Product Details

  • Sold individually
  • Provides a snug fit that will not slip
  • Specially formulated to eliminate the strong rubber odor
  • Features molded-in colors
  • Does not discolor or fade

Product Description

PlastiColor Diamond Plate Grip Style Chevy Steering Wheel Covers are the highest quality covers from PlastiColor. They are specially formulated to eliminate the strong rubber odor that is often associated with steering wheel covers. They are also stronger, and feature molded-in colors that will not discolor or fade. These covers provide a snug fit that will not slip, and feature all of the trend-relevant and licensed properties
]]> Steering Chevrolet Catalytic http://chevroletspareset.com/Chevrolet-Catalytic-45.html Thu, 16 Feb 2012 04:27:59 -0600

Magnaflow 94006 Universal Catalytic Converter (Non CARB compliant)


List Price: $175.08
Price: $72.73
You Save: $102.35(58%)

Product Details

  • Corrosion resistant
  • Converters increase the horsepower and torque
  • Facilitates easy installation
  • Ensures long lasting durability
  • This item is not for sale in California/Non CARB compliant

Product Description

Magnaflow Universal Catalytic Converter is designed to increase the horsepower and torque. It is manufactured from high quality stainless steel that ensures long lasting durability. This converter facilitates easy installation and is corrosion resistant. It is backed by either a 25000 mile or a five year warranty whichever comes first.

Magnaflow 53004 Universal Catalytic Converter (Non CARB compliant)


List Price: $164.83
Price: $66.42
You Save: $98.41(60%)

Product Details

  • This item is not for sale in California/Non CARB compliant
  • Facilitates easy installation
  • Ensures long lasting durability
  • Corrosion resistant
  • Converters increase the horsepower and torque

Product Description

Magnaflow Universal Catalytic Converter is designed to increase the horsepower and torque. It is manufactured from high quality stainless steel that ensures long lasting durability. This converter facilitates easy installation and is corrosion resistant. It is backed by either a 25000 mile or a five year warranty whichever comes first.

Magnaflow 93419 Direct Fit Catalytic Converter (Non CARB compliant)


List Price: $1,127.96
Price: $469.46
You Save: $658.50(58%)

Product Details

  • Features a ribbed design, a funneled inlet and outlet
  • Requires no cutting or bending
  • This item is not for sale in California/Non CARB compliant
  • Designed for easy bolt-on installation
  • Consists of stainless steel body and heat shield

Product Description

Magnaflow Direct Fit Catalytic Converter is designed for easy bolt-on installation. It features a ribbed design, a funneled inlet and outlet which renders a customized fit. This converter consists of stainless steel body and heat shield. It requires no cutting or bending and is backed by 25000 miles or 5 year limited warranty whichever comes first.

Magnaflow 23520 Direct Fit Catalytic Converter (Non CARB compliant)


List Price: $416.51
Price: $159.89
You Save: $256.62(62%)

Product Details

  • Requires no cutting or bending
  • This item is not for sale in California/Non CARB compliant
  • Designed for easy bolt-on installation
  • Features a ribbed design, a funneled inlet and outlet
  • Consists of stainless steel body and heat shield

Product Description

Magnaflow Direct Fit Catalytic Converter is designed for easy bolt-on installation. It features a ribbed design, a funneled inlet and outlet which renders a customized fit. This converter consists of stainless steel body and heat shield. It requires no cutting or bending and is backed by 25000 miles or 5 year limited warranty whichever comes first.

Magnaflow 91005 Universal Catalytic Converter (Non CARB compliant)


List Price: $164.83

Product Details

  • Corrosion resistant
  • Converters increase the horsepower and torque
  • Facilitates easy installation
  • This item is not for sale in California/Non CARB compliant
  • Ensures long lasting durability

Product Description

Magnaflow Universal Catalytic Converter is designed to increase the horsepower and torque. It is manufactured from high quality stainless steel that ensures long lasting durability. This converter facilitates easy installation and is corrosion resistant. It is backed by either a 25000 mile or a five year warranty whichever comes first.

Magnaflow 39004 Universal Catalytic Converter - CARB Compliant


List Price: $376.81
Price: $144.65
You Save: $232.16(62%)

Product Details

  • Equipped with stainless steel body and heat shield
  • Contains a flow efficient and monolithic honeycomb catalyst
  • Features a ribbed design as well as funneled inlets and outlets
  • Facilitates hassle-free installation
  • Complies with California Vehicle Code Section 27156 & 38391

Product Description

Designed with ease of installation in mind, this direct-fit converters from Magnaflow are the perfect complement to your OEM exhaust system. With no welding, cutting or bending required, you can easily add one of the direct-fit converters from Magnaflow to your vehicle when its time to replace the original catalytic converter. Whether your original converter has gone bad or you are just looking to upgrade to something more performance oriented, this direct fit converters from Magnaflow are just right. Featuring a ribbed design as well as funneled inlets and outlets, each converter features a stainless steel body and heat shield and contains a flow efficient, monolithic honeycomb catalyst designed for maximum flow and surface area. Best of all, the 49-state direct-fit converters from Magnaflow are in compliance with EPA guidelines so getting a car smog checked is a worry free task.
]]> Exhaust